Designed to make local origination easy, the Drake VMD860AG and VMD860AS desktop audio-video modulators are perfect for portable or temporary video installations such as a video cart or suitcase videographer.
This modulator series is popular in schools, institutions, and with CATV companies because the frequency agile VMD860AG and VMD860AS allow front panel pushwheel switch selection of standard CATV channels 2 through 135, CATV subband channels, T7 through T14, or VHF/UHF TV channels 2 through 69. This means the local operator can utilize "T" channels to return local origination programming to the control headend or generate signals on the desired operational channel.
These Audio-Video modulators are high quality, vestigial sideband units with synthesized visual and aural carriers. The aeronautical channels are offset positive with a tolerance of ±5 kHz as required by FCC rules.
The heterodyne conversion system, in conjunction with the use of a SAW filter, ensures optimum vestigial selectivity for adjacent channel headends.
These modulators are designed to accept any standard audio/video source such as NTSC video and audio baseband signals from a satellite receiver, TV camera, videotape recorder, TV demodulator, or similar signal source.
The VMD860AG or VMD860AS modulator is designed to accept standard (negative sync) polarity video at 0.6 to 1.5 Vp-p level. All level controls are located on the front panel for ease of operation. Audio and video overmodulation indicators are provided. Output level is +45 dBmV and is adjustable over a 10 dB range.
Field-defeatable audio pre-emphasis in the VMD860AG allows transmission of BTSC encoded baseband stereo audio signals using a Drake stereo encoder.
The VMD860AS accepts stereo audio inputs and generates a BTSC stereo audio signal without an external encoder.
This product is also available in a rack
mounted configuration as the VMR860AG
or VMR860AS.
|
You may download the owners manual in Adobe® Reader format by clicking here. |
|
|
If you don't have the Adobe® Reader, click here. |
|
| RF | |
| Frequency Range: |
7 to 860 MHz; Standard CATV channels 2 to 135, Broadcast TV channels 2 to 69. CATV T Channels, T7 - T14 |
| FCC Frequency Offsets: | Automatic (+12.5 kHz, +25 kHz, or none as required for each channel). |
| Output level: | +45 dBmV (typical with 12 dB adjustment range). |
| Output Impedance: | 75 Ohms, 12 dB return loss. |
| A/V Ratio: | Audio carrier level, adjustable from -20 to -12 dB referenced to video carrier level. |
| Frequency Stability: | ±5 ppm. |
| Intercarrier Frequency: | 4.5 MHz ±5 ppm. |
| Spurious Outputs (5 MHz to 900 MHz): | -60 dBc typical, measured at -15 dB A/V ratio and with modulator output level of +45 dBmV. |
| In-channel C/N: | 65 dB typical, 4 MHz bandwidth. |
| Broadband Noise: | -75 dBc typical, 4 MHz bandwidth @ +45 dBmV output. |
| VIDEO | |
| Input Level for 87.5% Modulation: |
0.6 Vp-p to 1.5 Vp-p. Manual gain
adjust with front panel control. Overmodulation indicator provided. |
| Input Impedance: | 75 Ohms, return loss of 20 dB minimum. |
| Frequency Response: | 20 Hz to 4.2 MHz, ±1 dB. |
| C/L Delay: | Within 50 nSec. of FCC Predistortion curve. |
| Differential Gain: | 3% maximum (10 to 90% APL). |
| Differential Phase: | 3º maximum (10 to 90% APL). |
| AUDIO | |
| Input Level for 25 kHz Peak Deviation: |
100 mVrms to 2.5 Vrms. Manual gain
adjust with front panel control. Overmodulation indicator provided. |
| Input Impedance: | 10 K Ohms, unbalanced. |
| Pre-emphasis: | 75 µSec., defeatable by internal jumper for BTSC baseband stereo encoder compatibility on VMD860AG |
| VMD860AG Frequency Response: |
40 Hz to 15 kHz, ±1.0 dB
referenced to 75 µSec. pre-emphasis curve. 40 Hz to 100 kHz, ±0.5 dB if pre-emphasis is defeated. |
| VMD860AS Frequency Response: | 50 Hz to 14 kHz, ±1.0 dB referenced to 75 µSec. pre-emphasis curve. |
| VMD860AS Stereo Separation: |
>30 dB, 100 Hz to 10 kHz >20 dB, 50 Hz to 100 Hz >25 dB, 10 kHz to 14 kHz. |
| S/N ratio: | 65 dB. |
| Total Harmonic Distortion: | 0.5% maximum. |
| GENERAL | |
| DC Power Input: | +10 to +18 VDC / 475 mA - from supplied AC adapter. |
| Supplied AC Adapter: |
Input, 120 VAC / 60 Hz, wall adapter. Output, 12 VDC, 800mA, maximum. |
| Operating Temperature: | 0º C to +50º C ambient. |
| Size: | 8.25" (21 cm) W x 1.75" (4.45 cm) H x 7" (17.78 cm) D. |
| Weight: | 2 lbs. 6 oz. (1.08 Kg). |
|
|
R.L. Drake, LLC |
Sales: 937-746-4556 |
