VMM600 Video Modulator
|
|
|
The Drake VMM600 Video Modulator is a professional quality modular headend system designed to optimize rack space. The VMM600 is a high quality fixed channel heterodyne audio/video modulator. One to twelve modulators can be mounted in the same amount of rack space typically required for two standard size units. Ideally suited for private cable, hotels and motels, institutional, and SMATV applications, the VMM600 accepts video and audio baseband signals from a satellite receiver, TV camera, videotape recorder, TV demodulator, or similar signal sources.
| You may download the owners manual in Adobe® Reader format by clicking here. | |
| If you don't have the Adobe® Reader, click here. |
|
| RF | |
| Frequency Range: | 54 through 600 MHz. |
| Frequency Selection: |
Set at the factory to one of the
following channels: Cable Channels 1 through 86, 95 through 99, or UHF TV Channels 14 through 35 |
| Output Level: | +45dBmV minimum, typically adjustable from +30 to +45 dBmV |
| Output Impedance: | 75 Ohms, return loss of 12 dB |
| A/V Ratio: | Audio Carrier -22 to -10 dB referenced to video carrier, adjustable |
| Frequency Stability: | ± 5 kHz (Visual Carrier) |
| Intercarrier Frequency: | 4.5 MHz |
| FCC Frequency Offsets: | All aeronautical channels are offset positive |
| Spurious Outputs: | -65 dBc, measured at -15 dB A/V ratio and with modulator output level of +45 dBmV |
| Broadband Noise: | -95 dBc (4MHz bandwidth, ±12MHz offset) |
| Video | |
| Input Level for 87.5% modulation: | 1 Vp-p ± 3 dB, manual gain adjustable with front panel control |
| Input Impedance: | 75 Ohms, return loss of 18 dB minimum |
| Frequency Response: | 20 Hz to 4.2 MHz, ± 1 dB |
| Video S/N: | 65 dB luminance weighted |
| Differential Gain: | ± 3% (10 to 90% APL) |
| Differential Phase: | ± 3 degrees (10 to 90% APL) |
| Audio | |
| Input Level for 25 kHz Peak Deviation: | 140 mV minimum. Manual gain adjustment with front panel control |
| Input Impedance: | 10K Ohms, unbalanced |
| Pre-emphasis: | 75 µ Seconds (Defeatable via internal jumper for BTSC baseband compatibility) |
| Frequency Response: | 40 Hz to 15 kHz, ± 1 dB referenced to 75 µ Seconds pre-emphasis curve. (20 Hz to 100 kHz if pre-emphasis is defeated.) |
| Intercarrier Stability: | ± 5 kHz, 0° to 50° Celsius (32° to 122° Fahrenheit) |
| Total Harmonic Distortion: | 0.5% maximum |
| Hum and Noise: | -65 dB minimum, referenced to 25 kHz peak deviation |
| General | |
| DC Power Input: | +12 VDC @ 150 to 220 mA, +5 VDC @ 75 to 100 mA |
| Operating Temperature: | 0° to 50° Celsius (32° to 122° Fahrenheit), ambient. |
| Dimensions: | 3.5 inches (89 mm) Height x 1 inch (25 mm) Width x 7.5 inches (191 mm) Depth |
| Weight: | 10.7 ounces (0.30 kg.) |
 |
R.L. Drake, LLC |
Sales: 937-746-4556 |
