 |
|
|
|
|
Power for an up to eight of Drake Digital modules is provided by the PS8 power supply.
In addition to the PS8 power supply, up to 12 Drake Digital modules may be accommodated by the DRMM12 rack enclosure. The completed assembly occupies two rack units high in a standard 19 inch rack.
The PS8 Power Supply supplies the +5 VDC & +12 VDC required by the Digital Modules. Using appropriate, customer supplied adapters, the PS8 will also power other DRAKE analog Mini-rack System modules sharing the same rack. These include a demodulator, both fixed and agile modulators and stereo modulation modules.
The DRMM4 Rack Enclosure with power supply
is also available for housing and powering up to four single width
modules. Typically, this rack is used with the DDC806 and DUC550
or DUC860 converters to create a simple and inexpensive hetrodyne
channel processor for digital television signals.
|
You may download the PS8 power supply owners manual in
Adobe®
Acrobat® format by clicking here. You may download the DRMM12 rack enclosure owners manual in Adobe® Acrobat® format by clicking here. You may download the DRMM4 rack enclosure owners manual in Adobe® Acrobat® format by clicking here. |
|
| If you don't have the Adobe® Acrobat® Reader, click here. |
 |
|
|
|
|
|
Power Requirements: |
100 – 240 VAC ±10%. | 100 – 240 VAC ±10%. |
|
Input Frequency: |
50 – 60 Hz. | 50 – 60 Hz. |
|
AC Input Power: |
80 Watts. | 30 Watts. |
|
Operating Temperature Range: |
0 to +50°C. | 0 to +50°C. |
|
Internally Mounted Fan: |
YES, 12 CFM (ft.³/min.). | YES |
|
Output Voltages: |
+5VDC @ 4.75 Amps maximum. +12 VDC @ 3.0 Amps maximum. |
+5VDC @ 1.5 Amps maximum. +12 VDC @ 1.5 Amps maximum. |
|
|
||
|
Dimensions: |
4.2" W x 3.5" H x 9.4" D. | 19" W x 1.75" H x 8.5" D. |
|
Weight: |
2.6 lbs. | 2.8 lbs. |
|
|
||
|
AC Input: |
IEC., 6ft. USA AC power cord supplied. | USA AC power cord attached. |
|
DC Output: |
Mini-Fit JR. x 8. | Mini-Fit JR. x 4. |
|
Fuse (Internal, AC Input): |
2A, 250 V, SLO-BLO, 5 x 20 mm. Power supply assembly employs short circuit and over-voltage protection. |
2A, 250 V, SLO-BLO, 5 x 20 mm. Power supply assembly employs short circuit and over-voltage protection. |
|
230 Industrial Drive Franklin, OH 45005 U.S.A. |
Fax: 937-806-1510 Parts and Service: 937-746-6990 In Canada: 705-742-3122 |
